Game Console R33S
Overview
Hardware
SoC |
CPU |
GPU |
Rockchip RK3326 |
ARM Cortex-A35 (Quad-core) @ 1.3 GHz |
Mali G31 |
Display |
RAM |
eMMC |
Connectivity |
3.5-inch 640*480 |
1 GB (some revisions 512 MB) DDR3 |
None |
None |
Software
Kernel |
GPU drivers |
Compositor |
Interface |
Mainline Linux |
libmali (GLES 3.2) & Panfrost (GL 3.1/GLES 3.1) |
Sway |
Emulation Station |
Controls
RetroArch Hotkeys
Button Combo |
Action |
SELECT+START (x2) |
Quit Game |
SELECT+R1 |
Save State |
SELECT+L1 |
Load State |
SELECT+Y(NORTH) |
Open RA Menu |
SELECT+X(WEST) |
Show FPS |
SELECT+R2 |
Fast-Forward |
Notes:
- By default ROCKNIX will detect your controller and configure RetroArch hotkeys automatically. This is controlled by the "AUTOCONFIGURE RETROARCH HOTKEYS" option in the
Settings > Controller & Bluetooth
menu. While the option is enabled, RetroArch hotkeys will be overwritten by the above defaults each time RetroArch is launched. If this behavior is not desired that option can be disabled and your user-defined RetroArch hotkeys will be used instead.
Mednafen Hotkeys
Button Combo |
Action |
SELECT+START (hold for 2sec) |
Quit Game |
SELECT+R1 |
Save State |
SELECT+L1 (hold for 2sec) |
Load State |
SELECT+X(WEST) |
Show FPS |
SELECT+R2 |
Fast-Forward |
START+L1 |
Select disc |
START+R1 |
Eject/Insert disc |
START+D-Pad Left |
Decrease save slot by 1 |
START+D-Pad Right |
Increase save slot by 1 |
START+L2 |
Configure buttons on virtual port 1 |
START+R2 |
Insert coin |
Notes:
- By default ROCKNIX will expand the configuration file according to the first controller mednafen finds. This only happens when the config file doesn't exist (meaning the first time or if you manually delete it). After the initial expansion you are free to customize the controls.
Global Hotkeys
Button Combo |
Action |
SELECT+Vol + |
Brightness Up |
SELECT+Vol - |
Brightness Down |
START+Vol + |
Battery Status |
START+Vol - |
WIFI Toggle |
HDMI Output
Press L1 + START + SELECT while in EmulationStation to swtich between Screen and HDMI output.
While this should work; it doesn't always result in the correct resolution. The best way to get consistent results is to turn off the device, plug in an HDMI cable and reboot.
"Why doesn't hot-plugging just work?"... Hot-plug HDMI switching is a fairly complex action to accomplish and not something we have implemented on any device. If you are a developer and interested in helping to build this functionality please start here: Contribute
Emulators
Notes
Installation
Download the latest RK3326
version of ROCKNIX from the button below and follow the instructions listed on the Install page.